MIL-A-45112 - Amplifier, Intermediate Frequency Am-1059/Ms
MIL-A-45126 - Amplifier, Trigger, Am-1058/Ms
MIL-A-45129 - Amplifier, Electronic Control, Am-1079/M
MIL-A-45130 - Amplifier, Electronic Control Am-1057/Ms
MIL-A-45132 - Amplifier, Electronic Control Am-1105/M
MIL-A-45134 - Amplifier, Trigger Am-1104A/M
MIL-A-45136 - Amplifier, Direct Current, Am-1093/M
MIL-A-45606 - Amplifier, Electronic Control, Am-1056/M
MIL-A-45610 - Amplifier, Video, Am-1076/M
MIL-A-45612 - Antenna At859/Tp6-4 And Antenna At860/Tp6-4
MIL-A-45613 - Amplifier Video, Tracking, 7620510
MIL-A-45614 - Amplifier, If Tracking, 7614273
MIL-A-45627 - Amplifier, Video, Am-1081/M
MIL-A-45629 - Amplifier, Electronic Control, 7620525
MIL-A-45652 - Amplifier, Intermediate Frequency Am-1062/Ms
MIL-A-45684 - Amplifier-Mixer Stage, Am-1073/M
MIL-A-46330 - Amplifier, Video, Am-1075 A/M
This specification covers one type of plan positioning indicator (PPI) video amplifier, referred to as "video amplifier".
MIL-A-48607 - Amplifier, Doppler Assembly: 11740261
This specification covers the requirements, quality assurance provisions, and packaging for a doppler amplifier assembly used in Radar Receiver R-1475, part of Radar Set AN/VPS-2 (see 6.1).
MIL-A-48608 - Amplifier, Doppler Board Assembly: 11740262
This specification covers the requirements, examinations and tests for a doppler amplifier board assembly used in Radar Receiver R-1475/VPS-2, part of Radar Set AN/VPS-2. (see 6.1).
MIL-A-50655 - Assembly, Board, Klystron Power Supply: 10548905
This specification covers a plus volt DC board assembly which generates the klystron tube filament voltage. This board assembly is part of the klystron power supply used in the Receiver-Transmitter RT-860, part of the Radar Set AN/VPS-2.
MIL-A-50682 - Amplifier, Doppler, 10548313 (S/S By Mil-A-48607 And 48608)
MIL-A-50687 - Antenna Assembly As-2049/Vps-2: 10556312 And As-2049A/Vps-2A: 12563321
This specification covers the requirements, examinations and tests for Antenna Assembly AS-2049/VPS-2 which is used as the antenna for the Radar Set AN/VPS-2.
MIL-A-60100 - Amplifier, Intermediate Frequency Am-1063/Ms - Am-1064/Ms
This specification covers two types of intermediate frequency (IF) amplifier which are part of the moving target indicator (MTI) synchronizer.
MIL-A-70702 - Azimuth Drive Assembly: 9360802
This specification covers the requirments and tests for the azimuth drive assembly used on Gun, Anti-Aircraft, Artillery, Self-Propelled 20 MM, M163A2, and Towed 20 MM, M167A2.
MIL-B-48433 - Board Assembly, Generator: 10548611
This specification covers the Generator Board Assembly, hereinafter referred to as the generator board, a part of the Digital Generator, 10548613.
MIL-B-50653 - Board, Component: 10548362
This specification covers a component board used in the Klystron Power Supply, a part of the Radar Set AN/VPS-2. The component board provides circuitry for generating trigger pulses to form the modulator pulse. The component board also provides circuitry for overload sensing and relay closures for overload protection.
MIL-B-50670 - Board Assembly: 10548604
This specification covers a board assembly, part of Diode Switch Driver Subassembly 10548602. The diode switch driver subassembly is used in Receiver-Transmitter RT-860, part of Radar Set AN/VPS-2.
MIL-C-45197 - Control, Receiver, C-1450/Ms
MIL-C-45619 - Control, Acquisition Antenna, 7622004
MIL-C-48436 - Test Set Subassembly: 11726378 (7.5 Mhz Clock)
This specification covers a Test Set Subassembly, 11726378, herein referred to as the 7.5 MHz clock, used in Test Set Subassembly MX-8050/TPM-22, part of Radar Test Set AN/TPM-22 (see 6.1).
MIL-C-48584 - Circuit Card Assembly, 11747101 (Range And Range Rate Generator)
This specification covers one type of Range and Range Rate Generator printed circuit board, herein referred to as the "Range and Range Rate Generator" which forms a part of SCG Servo Test Set 11747100.
MIL-C-48585 - Circuit Card Assembly 11748240 (Sight Current Generator Adapter)(No S/S Document)
This specification covers the requirements for a Sight Current Generator Adapter circuit board, herein referred to as the "SCG Adapter" which forms a part of Electronic System Test Set AN/TSM 100.
MIL-C-50306 - Case, Shipping, Reusable, 10559875, 11730881 And 11730882
MIL-C-50329 - Converter, Electronic: 10549013
MIL-C-50330 - Converter, Dc/Dc: 10549021
This specification covers the de/de converter used in Power Supply PP-4812, a part of Radar Set AN/VPS-2. The de/de converter is also used in Subassembly PP324, part of Radar Test Set AN/TPM-22. The de/de converter provides the necessary voltages for functional operation of the Radar Set AN/VPS-2.
MIL-C-50344 - Counter, Electronic: 10548009
This specification covers an electronic counter hereinafter, referred to as PRF (Pulse Repetition Frequency) counter, used in Subassembly Test Set MX-8048 /TPM-22; , part of Radar Test Set AN/TPM-22, and Range Computer CP-888/VPS-2, part of Radar Set AN/VPS-2 (see 6.1).
MIL-C-50652 - Circuit Card Assemblies, Radar Set An/Vps-2, Cp-888/Vps-2 General Specification For
This specification covers the general requirements for circuit card assemblies, hereinafter referred to as "assemblies", used in Range Computer CP-888/VPS-2, part of Radar Set AN/VPS-2 (see 6.1).
MIL-C-50652/1 - Circuit Card Assembly: 9355881 (Generator, Modulator Trigger)
This specification covers the detail requirements,quality assurance provisions, and packaging for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-50652 comprise the complete requirements for the modulator trigger generator.
MIL-C-50652/10 - Circuit Card Assembly, 10548012 (Counter B, Range Rate)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-50652 comprise the complete requirements for the range rate counter B as used in the Range Computer CP-888/VPS-2, part of the Radar Set AN/VPS-2.
MIL-C-50652/11 - Circuit Card Assembly: 10548049 (Scaler, Rate)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-50652 comprise the complete requirements for the rate scaler used in Range Computer CP-888/VPS-2, part of Radar Set AN/VPS-2.
MIL-C-50652/12 - Circuit Card Assembly: 10548086 (Integrator, Rate)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-50652 comprise the complete requirements for the rate integrator assembly used in the Range Computer CP-888/VPS-2, part of Radar Set AN/VPS-2.
MIL-C-50652/13 - Circuit Card Assembly: 10548133 (Detector, Phase)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-50652 comprise the complete requirements for the phase detector assembly used in the Range Computer CP-888/VPS-2, part of Radar Set AN/VPS-2.
MIL-C-50652/14 - Circuit Card Assembly: 10548359 (Converter, Range D/A, 4A16)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification, together with the general requirements of MIL-C-50652, comprise the complete requirements for the range D/A converter used in Computer, Range CP-888/VPS-2, part of Radar Set AN/VPS-2.
MIL-C-50652/15 - Circuit Card Assembly: 10548330 (Converter, Range Rate D/A 4A17)
MIL-C-50652/16 - Circuit Card Assembly. 10548450 (Amplifier, Control)
MIL-C-50652/17 - Circuit Card Assembly: 10548638 (Delay, Fine/Fine)
The detail requirements of this specification sheet together with the general requirements of MIL-C-50652 comprise the complete requirements for the Fine/Fine Delay Assembly used in Range Computer CP-888/VPS-2, part of Radar Set AN/VPS-2.
MIL-C-50652/18 - Circuit Card Assembly. 10549234 (Board, Universal)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-50652 comprise the complete requirements for the universal board assembly used in the Range Computer CP-888/VPS-2, part of Radar Set AN/VPS-2.
MIL-C-50652/2 - Circuit Card Assembly: 10548007 (Generator, Computer Timing)
The detail requirements of this specification sheet together with the general requirements of MIL-C-50652 comprise the complete requirements for the Computer Timing Generator. This assembly uses binary counters in cascade to produce timing pulses of 4 KHz, 250 Hz, and 25 Hz. Also provided by this assembly is a signal conditioner and a five-line decoder output.
MIL-C-50652/3 - Circuit Card Assembly: 10548119 (Decoder, Rcfd)
The detail requirements of this specification sheet together with the general requirements of MIL-C-50652 comprise the complete requirements for the Range Control Fine Delay Decoder (RCFD Decoder) used in the Range Computer CP-888/VPS-2, part of Radar Set AN/VPS-2. The RFCD Decoder forms part of a binary to decimal decoder for 1.25 meter range increments, provides a single output called the E/L coarse output from the RCGD high and low data, and has circuits for detecting minimum and maximum range rates and velocity of less than 10 meters per second.
MIL-C-50652/4 - Circuit Card Assembly: 10548046 (Counter, Range)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-50652 comprise the complete requirements for the range counter used in the Range Computer CP-888/VPS-2, part of Radar Set AN/VPS-2.
MIL-C-50652/8 - Circuit Card Assembly: 10548148 (Control, Search/Track, And Gain)
This specification covers the detail requirements for one type of circuit card assembly, hereafter referred to as assembly. The requirements of this specification, together with the general requirements of MIL-C-50652, comprise the complete requirements for the search/track, and gain control assembly used in Range Computer, CP-888/VPS-2, part of Radar Set AN/VPS-2 (see 6.1 of MIL-C-50652).
MIL-C-50652/9 - Circuit Card Assembly: 10548125 (Counter A, Range Rate)
The requirements for procuring the product described herein shall consist of this specification sheet and the issue of the following specification listed in that issue of the Department of Defense Index of Specifications and Standards (DODISS) specified in the solicitation MIL-C-50652.
MIL-C-50675 - Circuit Assembly: Agc: 10549228
This specification covers an Automatic Gain Control (AGC) Circuit Assembly hereinafter referred to an AGC Assembly, used in Radar Receiver R-1475/VPS-2, part of Radar Set AN/VPS-2 (see 6.1).
MIL-C-50679 - Circuit Board Assembly, Agc: 10549230
This specification covers an AGC Circuit Board Assembly, hereinafter referred to as an ACG Board, used in AGC Circuit Assembly (10549228). The AGC Circuit Assembly is used in Radar Receiver R-1475, part of Radar Set AN/VPS-2 (see 6.1).
MIL-C-50685 - Computer, Range Cp-888/Vps-2: 10548339
This specification covers the Computer, Range CP-888/VPS-2, hereinafter called the computer. The computer is part of Radar Set AN/VPS-2.
MIL-C-50785 - Circuit Card Assembly, Sight Current Generator, General Specification For
This specification covers the general requirements for circuit card assemblies which form a part of the Sight Current Generator (see 6.1).
MIL-C-50785/1 - Circuit Card Assembly 9337291 (Voltage Comparator)
This specification covers the detail requirement for one type of circuit card assembly. The requirements of this specification together with the general requirements of Specification MIL-C-50785 comprise the complete requirements for the Voltage Comparator Circuit Card Assembly.
MIL-C-50785/10 - Circuit Card Assembly, 10545707 (Time Delay)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of specification MIL-C-50785 comprise the complete requirements for the Time Delay Circuit Card Assembly.
MIL-C-50785/11 - Circuit Card Assembly: 12000011 (Mode Scaling)
MIL-C-50785/12 - Circuit Card Assembly: 12000012 (Computation Control)
MIL-C-50785/13 - Circuit Card Assembly: 12000013 (Atmospheric Correction)
MIL-C-50785/14 - Circuit Card Assembly: 12000010 (Ballistic Constant)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of specification MIL-C-50785 comprise the complete requirements for the Ballistic Constant Circuit Card Assembly.
MIL-C-50785/15 - Circuit Card Assembly: 12000015 (Rate Series)
MIL-C-50785/16 - Circuit Card Assembly: 12000016 (Range Series)
MIL-C-50785/17 - Circuit Card Assembly 12000252 Time Delay
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of specification MIL-C-50785 comprise the complete requirements for the Time Delay Circuit Card Assembly.
MIL-C-50785/2 - Circuit Card, 10545483 (Firing Indicator)
MIL-C-50785/3 - Circuit Card Assembly. 10545492 (Outbound Configuration)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of thi
MIL-C-50652/5 - Circuit Card Assembly: 10548016 (Generator, Rcfd)
The detail requirements of this specification together with the general requirements of MIL-C-50652 comprise the complete requirements for the Range Control Fine Delay Generator (RCFD Generator) used in Range Computer CP-888/VPS-2, part of Radar Set AN/VPS-2. This assembly provides vernier delays +- 1.25 meters of the E/L coarse trigger produced in the range counter assembly.
MIL-C-50652/6 - Circuit Card Assembly: 10548122 (Register A, Range)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-50652 comprise the complete requirements for the range register A used in Range Computer CP-888/VPS-2, part of Radar Set AN/VPS-2 (see 6.1 of MIL-C-50652).
MIL-C-50652/7 - Circuit Card Assembly, 10548021 (Register B, Range)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of MIL-C-50652 comprise the complete requirements for the range register B, used in Range Computer CP-888/VPS-2, part of Radar Set AN/VPS-2.
MIL-C-50652/8 - Circuit Card Assembly: 10548148 (Control, Search/Track, And Gain)
This specification covers the detail requirements for one type of circuit card assembly, hereafter referred to as assembly. The requirements of this specification, together with the general requirements of MIL-C-50652, comprise the complete requirements for the search/track, and gain control assembly used in Range Computer, CP-888/VPS-2, part of Radar Set AN/VPS-2 (see 6.1 of MIL-C-50652).
MIL-C-50652/9 - Circuit Card Assembly: 10548125 (Counter A, Range Rate)
The requirements for procuring the product described herein shall consist of this specification sheet and the issue of the following specification listed in that issue of the Department of Defense Index of Specifications and Standards (DODISS) specified in the solicitation MIL-C-50652.
MIL-C-50675 - Circuit Assembly: Agc: 10549228
This specification covers an Automatic Gain Control (AGC) Circuit Assembly hereinafter referred to an AGC Assembly, used in Radar Receiver R-1475/VPS-2, part of Radar Set AN/VPS-2 (see 6.1).
MIL-C-50679 - Circuit Board Assembly, Agc: 10549230
This specification covers an AGC Circuit Board Assembly, hereinafter referred to as an ACG Board, used in AGC Circuit Assembly (10549228). The AGC Circuit Assembly is used in Radar Receiver R-1475, part of Radar Set AN/VPS-2 (see 6.1).
MIL-C-50685 - Computer, Range Cp-888/Vps-2: 10548339
This specification covers the Computer, Range CP-888/VPS-2, hereinafter called the computer. The computer is part of Radar Set AN/VPS-2.
MIL-C-50785 - Circuit Card Assembly, Sight Current Generator, General Specification For
This specification covers the general requirements for circuit card assemblies which form a part of the Sight Current Generator (see 6.1).
MIL-C-50785/1 - Circuit Card Assembly 9337291 (Voltage Comparator)
This specification covers the detail requirement for one type of circuit card assembly. The requirements of this specification together with the general requirements of Specification MIL-C-50785 comprise the complete requirements for the Voltage Comparator Circuit Card Assembly.
MIL-C-50785/10 - Circuit Card Assembly, 10545707 (Time Delay)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of specification MIL-C-50785 comprise the complete requirements for the Time Delay Circuit Card Assembly.
MIL-C-50785/11 - Circuit Card Assembly: 12000011 (Mode Scaling)
MIL-C-50785/12 - Circuit Card Assembly: 12000012 (Computation Control)
MIL-C-50785/13 - Circuit Card Assembly: 12000013 (Atmospheric Correction)
MIL-C-50785/14 - Circuit Card Assembly: 12000010 (Ballistic Constant)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of specification MIL-C-50785 comprise the complete requirements for the Ballistic Constant Circuit Card Assembly.
MIL-C-50785/15 - Circuit Card Assembly: 12000015 (Rate Series)
MIL-C-50785/16 - Circuit Card Assembly: 12000016 (Range Series)
MIL-C-50785/17 - Circuit Card Assembly 12000252 Time Delay
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of specification MIL-C-50785 comprise the complete requirements for the Time Delay Circuit Card Assembly.
MIL-C-50785/2 - Circuit Card, 10545483 (Firing Indicator)
MIL-C-50785/3 - Circuit Card Assembly. 10545492 (Outbound Configuration)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of specification MIL-C- 80785 comprise the complete requirements for the Outbound Configuration Circuit Board Assembly.
MIL-C-50785/4 - Circuit Card Assembly, 10545670 (Ballistic Correction M220/M246E3)
This specification covers the detail requirement for one type of circuit card assembly. The requirements of this specification together with the general requirements of specification MIL-C-50785 comprise the complete requirements for the Ballistic Correction Circuit Card Assembly.
MIL-C-50785/5 - Circuit Card Assembly. 10545702 (Ballistics Data Amplifier)
This specification covers the detail requirements for one type of circuit card assembly hereinafter referred to as assembly. The requirements of this specification together with the general requirements of specification MIL-C-50785 comprise the complete requirements for the Ballistic Data Amplifier Circuit Card Assembly.
MIL-C-50785/6 - Circuit Card Assembly, 10545703 (Buffer Amplifier)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of a specification MIL-C-50785 comprise the complete requirements for the Buffer Amplifier Circuit Card Assembly.
MIL-C-50785/7 - Circuit Card Assembly. 10545704 (Acquisition Time Delay)
This specification covers the detail requirements for one type of circuit card assembly. The requirement of this specification together with the general requirements of specification MIL-C-50785 comprise the complete requirements for the Acquisition Time Delay Circuit Card Assembly.
MIL-C-50785/8 - Circuit Card Assembly, 10545705 (Sight Correction)
This specification covers the detail requirements for one type of circuit card assembly. The requirements of this specification together with the general requirements of specification MIL-C-50785 comprise the complete requirements for the Sight Correction Circuit Card Assembly.
MIL-C-50785/9 - Circuit Card Assembly. 10545706 (Pulse Width Multiplier)
MIL-C-70562 - Computer, Range Cp-888A/Vps-2A: 9361153
This specification covers the requirements, examinations and tests for a Computer, Range CP-888A/VPS-2A, hereinafter referred to as the computer. The computer is a part of Radar Set AN/VPS-2A. The radar set range computer generates range and test data based on the signals received from the receiver. The range computer then transmits this information to the fire control processor whereit is used in solving the fire control problem. The radar set range computer contains a built-in-test circuit assembly for signal monitoring and fault isolation (see 6.1).
MIL-C-70567 - Circuit Board, Computer And Memory: 9360878
This specification covers the requirements, examinations and tests for the fire control processor computer and memory circuit card assembly, referred to as the computer and memory board (CMB). The CMB is used to compute ballistics calculations and communicate with the servo control processor input/output board and data transmission board. The CMB also manages weapon system Built-In-Test (BIT). The CMB is a 10 1/2 inch by 7 1/4 inch double-layered, multi-wire circuit card mounted vertically in the fire control processor (FCP). Refer to Figure 1 for the CMB functional block diagram (see 6.1).
MIL-C-70568 - Circuit Board, Input/Output: 9360881
This specification covers the requirements, examinations and tests for the Fire Control Processor input/output circuit card assembly referred to as the Input/Output Board (IOB). The IOB is a 7 by 10 1/2 inch, double-layered, multi-wire circuit card assembly mounted vertically in the fire control processor (FCP).
MIL-C-70569 - Circuit Board, Synchro Interface (Pivads): 9360871
This specification covers the requirements, examinations and tests for the fire control processor synchro interface circuit card assembly referred to as the Synchro Inter-face Board (SIB). The SIB is used to convert gun and sight position signals (azimuth and elevation) from analog to digital format and antenna position command signals from digital to analog format. The SIB is a 6 by 11 1/2 inch double-layered, multiwire circuit card mounted vertically in the Fire Control Processor (FCP) and hard wired to the Seno Controller Board (SCB).
MIL-C-70570 - Circuit Board, Servo Controller: 9360875
This specification covers the requirements, examinations and tests for the fire control processor servo controller circuit card assembly referred to as the Servo Controller Board (SCB). The SCB is a 6 by 11 1/2 inch, double-layer, multiwire circuit board that is mounted vertically in the Fire Control Processor (FCP). The SCB inputs and outputs the necessary servo control parameters required by the M61A1 sight and gun/turret drives. Refer to Figure 1 for the SCB functional block diagram (see 6.11)
MIL-C-70571 - Circuit Board, Built-In-Test Board No. 1, Unit 4: 9360949
This specification covers the requirements and tests for the AN/VPS-2A Radar Range Computer, Built-In-Test (BIT) Board No. 1 Assembly referred to as the Unit 4BB1.
MIL-C-70572 - Circuit Board, Built In Test Number 2, Unit 4: 9360952
This specification covers the ANIVPS-2A radar range computer Built-In-Test (BIT) board #2 assembly, referred to as the Unit 4 BB 2.
MIL-C-70573 - Circuit Assembly, Built In Test, 5A3A3, U/5: 9360998
This specification covers the requirements and tests for the AN/VPS-2A Radar Power Supply Built-In-Test (BIT) assembly, hereinafter referred to as the Unit 5 BIT assembly.
MIL-C-70574 - Circuit Board Assembly, Built In Test 2A8 Unit 2: 9361010
This specification covers the requirements and test for the AN/VPS-2A Radar receiver-transmitter Built-In-Test (BIT) circuit card assembly, herein referred to as the Unit 2 BIT assembly.
MIL-C-70575 - Circuit Board, Display Control Panel: 9360884
This specification covers the requirements, examinations and tests for the Display Control Panel Built-In-Test (BIT) circuit card assembly, hereinafter referred to as the Display Control Panel (DCP) BIT assembly, used on the Vulcan Air Defense System, Anti-Aircraft, Self-Propelled (M163A2), and Towed (M167A2) Vehicles (see 6.1).
MIL-C-70576 - Circuit Assembly, Built-In-Test Distribution Box (Pivads): 9360925
This specification covers the requirements, examinations and tests for the Distribution Box Built-In-Test (BIT) circuit card assembly, herein after referred to as the Distribution Box BIT Board (DBB). The DBB circuits are used to communicate cannon control voltages and mount hatch protection circuits data to the Fire Control Processor (FCP). Data transmission is non-continuous and reception is serially formatted through a Universal Asynchronous Receiver Transmitter (UART) link which is enabled by the FCP Central Processing Unit (CPU) . DBB contains twelve microcircuits and resistive, capacitive, and semi-conductive circuitry. The DBB is a 4 by 8 1/2 inch double-layered circuit card mounted vertically in the Distribution Box. Refer to Figure 1 for the Distribution Box BIT assembly functional block diagram (see 6.1).
MIL-C-70580 - Circuit Board, 400 Hz Inverter, Voltage Converter (Pivads): 9397386
This specification covers the Voltage Converter, 400 Hz Inverter (AC) board, hereinafter referred to as AC board, used on Gun, Anti-Aircraft Artillery, Self-Propelled (M163A2) and Towed (M167A2) Vehicles. The AC board is an ac power supply with overcurrent protection containing four microcircuits, two transformers, and resistor, capacitor, and semiconductor circuitry (see 6.1).
MIL-C-70581 - Circuit Board, +5.2 Volt Converter, Voltage Converter (Pivads): 9397383
This specification covers a Voltage Converter's, +5.2 Volt board used on Gun, Anti-Aircraft Artillery, Self-Propelled (M163A2) and Towed (M167A2) Vehicles. The +5.2 Volt board is a dc power supply with internal overcurrent protection and overvoltage sensing comprised of three microcircuits, three transformers, and resistor, capacitor, and semiconductor circuitry (see 6.1).
MIL-C-70582 - Circuit Board, +24 Volt Converter, Voltage Converter (Pivads): 9397385
This specification covers the plus/minus 24 Volt Converter (plus/minus 24 Volt) board, hereinafter referred to as plus/minus 24 Volt board, used on Gun, Anti-Aircraft, Artillery, Self-Propelled (M163A2) and Towed (M167A2) Vehicles. The plus/minus 24 Volt board is a dc power supply with overcurrent protection containing one microcircuit, three transformers, and resistor, capacitor, and semiconductor circuitry (see 6.1).
MIL-C-70583 - Circuit Board, +15 Volt Converter, Voltage Converter (Pivads): 9397384
This specification covers a Voltage Converter's, plus/minus 15 Volt Converter (plus/minus 15 Volt) board, hereinafter referred to as the "plus/minus 15 V board," used on Gun, Anti-Aircraft Artillery, Self-Propelled (M163A2) and Towed (M167A2) Vehicles. The plus/minus 15 V board is a dc power supply with overcurrent protection. The plus/minus 15 V board is a 4.56 by 5.41 inch double-sided printed circuit board mounted vertically in the voltage converter. The plus/minus 15 V board contains one microcircuit, three transformers, and resistor, capcitor, and semiconductor circuitry (see 6.1).
MIL-C-70584 - Circuit Board, Control And Synchronizer, Voltage Converter (Pivads): 9397382
This specification covers a Voltage Converter's, Control and Synchronizer (C/S) board, hereinafter referred to as "the (C/S) board," used on Gun, Anti-Aircraft Artillery, Self-Propelled (M163A2) and Towed (M167A2) Vehicles. The C/S board generates the frequency synchronization signals, initiates the start signal when the input voltage rises to the minimum voltage, and provides overvoltage protection for the voltage converter. The C/S board is a 4.56 by 5.41 inch double-sided printed circuit board mounted vertically in the voltage converter. The C/S board contains thirteen microcircuits and resistor, capacitor and semiconductor circuitry (see 6.1).
MIL-C-70585 - Circuit Board, Data Transmission (Pivads): 9397510
This specification covers general requirements and tests for the Fire Control Processor Data Transmission circuit card assembly, referred to as the Data Transmission Board (DTB). The DTB is a 7 1/4 by 11 inch, double layered, multiwire circuit card. The Data Transmission Board contains three digital data links that provide interface capability between th Fire Control Processor (FCP) and external devices for testing and training purposes. The data link circuitry is not utilized in normal fire control operations (see 6.1).
MIL-C-70586 - Control Assembly, M163A2 (Sp): 9361150
This specification covers the control assembly used on Gun, Anti-Aircraft, Artillery, Self-Propelled 20MM, M163A2. The control assembly shall consist of a control panel and an elevation control subassembly. The control panel shall contain the controls and indicators required to operate the M163A2 weapon system. The control panel shall allow for the entry and display of ballistics and system fault information after static and dynamic checkout. The elevation control subassembly shall control the azimuth and elevation positioning of the gun and firing of the gun. Circuits in the control assembly shall be designed to enable target range and speed information to be set in manually by the gunner or automatically by the radar (see 6.1).
MIL-C-70598 - Control Assembly, M167A2 (Towed): 9378473
This specification covers the control assembly used on Gun, Anti-Aircraft, Artillery, Towed 20MM, M167A2. The control assembly shall consist of a control panel and an elevation control subassembly. The control panel shall contain the controls and indicators required to operate the M167A2 weapon system. The panel control shall allow for the entry and display of ballistics and system fault information after static and dynamic checkout. The elevation control subassembly shall control the azimuth and elevation positioning of the gun and firing of the gun. Circuits in the control assembly shall be designed to enable target range and speed information to be set in manually by the gunner or automatically by the radar (see 6.1).
MIL-C-70701 - Cable Assembly W8, Fire Control Processor: 9397464
This specification covers the requirements, examinations and tests for cable assembly W8, fire control processor (cable assembly), hereinafter called "cable assembly," used on Gun, Anti-Aircraft Artillery, Self-Propelled, 20MM, M163A2, and Towed Vehicle, 20MM, M167A2. The cable assembly (located within the fire control processor) provides connections to the fire control processor (FCP) circuit boards. The cable assembly contains a 3.45 inch by 2.86 inch double-layered relay module board with one microcircuit and four limit relays (see 6.1).
MIL-C-71086 - Component Assembly, A2, Power Supply And Driver: 12000021
This specification covers the requirements, examinations and tests for Power Supply & Driver Component Assembly, A2, part of the Servo Amplifier used on Gun, Air Defense Artillery, Towed 20-MM, M167A1/A2.
MIL-D-45624 - Demodulator, Pulse, 7621688
MIL-D-48435 - Distribution Box: 10548533
This specification covers the distribution box, a part of Radar Set AN/VPS-2.
MIL-D-50656 - Diode Board Assembly: 10549017
This specification covers a diode board assembly used in the Power Supply PP-4812/VPS-2, part of the Radar Set AN/VPS-2 and the MX8051/TPM-22 and PP-6323/TPM-22, part of the Radar Test Set AN/TPM-22.
MIL-D-50669 - Driver, Switch: 10548602
This specification covers the switch driver (hereinafter identified as diode switch driver) used in Receiver-Transmitter TR-860/VPS-2, part of Radar Set AN/VPS-2 (see 6.1).
MIL-D-50677 - Detector, Doppler: 10548509
This specification covers a doppler detector assembly used in Radar Receiver R-1475, part of Radar Set AN/VPS-2.
MIL-D-60222 - Delay Cell, 7694430
MIL-D-60510 - Delay Cell: 7615435
This specification covers one type ultrasonic delay line operated at 60 megahertz (MHz). It is used to generate a series of pulses for range calibration.
MIL-D-70566 - Distribution Box Assembly: 9361136
This specification covers the requirements, examinations and tests for the distribution box assembly, hereinafter referred to as the D-box, used in Gun, Anti-Aircraft, Artillery, Self-Propelled 20MM, M163A2, and Towed 20MM, M167A2 (see 6.1).
MIL-D-70687 - Driver Circuit Board: 12594675
This specification covers the pre-amplifier assembly 12594675 herein referred to as the Driver Circuit Board, a sub-assembly of the Serve Electronics 10548193.
MIL-D-70704 - Distribution Box: 9397370
This specification covers the requirements and tests for the distribution box, a part of Radar Set AN/VPS-2A (see 6.1).
MIL-D-81277 - Demodulator, Ld 547012, (For Torpedo Mk 46 Mod O)
MIL-G-45611 - Generator, Sweep, O-294A/M
and Towed (M167A2) Vehicles. The +5.2 Volt board is a dc power supply with internal overcurrent protection and overvoltage sensing comprised of three microcircuits, three transformers, and resistor, capacitor, and semiconductor circuitry (see 6.1).
MIL-C-70582 - Circuit Board, +24 Volt Converter, Voltage Converter (Pivads): 9397385
This specification covers the plus/minus 24 Volt Converter (plus/minus 24 Volt) board, hereinafter referred to as plus/minus 24 Volt board, used on Gun, Anti-Aircraft, Artillery, Self-Propelled (M163A2) and Towed (M167A2) Vehicles. The plus/minus 24 Volt board is a dc power supply with overcurrent protection containing one microcircuit, three transformers, and resistor, capacitor, and semiconductor circuitry (see 6.1).
MIL-C-70583 - Circuit Board, +15 Volt Converter, Voltage Converter (Pivads): 9397384
This specification covers a Voltage Converter's, plus/minus 15 Volt Converter (plus/minus 15 Volt) board, hereinafter referred to as the "plus/minus 15 V board," used on Gun, Anti-Aircraft Artillery, Self-Propelled (M163A2) and Towed (M167A2) Vehicles. The plus/minus 15 V board is a dc power supply with overcurrent protection. The plus/minus 15 V board is a 4.56 by 5.41 inch double-sided printed circuit board mounted vertically in the voltage converter. The plus/minus 15 V board contains one microcircuit, three transformers, and resistor, capcitor, and semiconductor circuitry (see 6.1).
MIL-C-70584 - Circuit Board, Control And Synchronizer, Voltage Converter (Pivads): 9397382
This specification covers a Voltage Converter's, Control and Synchronizer (C/S) board, hereinafter referred to as "the (C/S) board," used on Gun, Anti-Aircraft Artillery, Self-Propelled (M163A2) and Towed (M167A2) Vehicles. The C/S board generates the frequency synchronization signals, initiates the start signal when the input voltage rises to the minimum voltage, and provides overvoltage protection for the voltage converter. The C/S board is a 4.56 by 5.41 inch double-sided printed circuit board mounted vertically in the voltage converter. The C/S board contains thirteen microcircuits and resistor, capacitor and semiconductor circuitry (see 6.1).
MIL-C-70585 - Circuit Board, Data Transmission (Pivads): 9397510
This specification covers general requirements and tests for the Fire Control Processor Data Transmission circuit card assembly, referred to as the Data Transmission Board (DTB). The DTB is a 7 1/4 by 11 inch, double layered, multiwire circuit card. The Data Transmission Board contains three digital data links that provide interface capability between th Fire Control Processor (FCP) and external devices for testing and training purposes. The data link circuitry is not utilized in normal fire control operations (see 6.1).
MIL-C-70586 - Control Assembly, M163A2 (Sp): 9361150
This specification covers the control assembly used on Gun, Anti-Aircraft, Artillery, Self-Propelled 20MM, M163A2. The control assembly shall consist of a control panel and an elevation control subassembly. The control panel shall contain the controls and indicators required to operate the M163A2 weapon system. The control panel shall allow for the entry and display of ballistics and system fault information after static and dynamic checkout. The elevation control subassembly shall control the azimuth and elevation positioning of the gun and firing of the gun. Circuits in the control assembly shall be designed to enable target range and speed information to be set in manually by the gunner or automatically by the radar (see 6.1).
MIL-C-70598 - Control Assembly, M167A2 (Towed): 9378473
This specification covers the control assembly used on Gun, Anti-Aircraft, Artillery, Towed 20MM, M167A2. The control assembly shall consist of a control panel and an elevation control subassembly. The control panel shall contain the controls and indicators required to operate the M167A2 weapon system. The panel control shall allow for the entry and display of ballistics and system fault information after static and dynamic checkout. The elevation control subassembly shall control the azimuth and elevation positioning of the gun and firing of the gun. Circuits in the control assembly shall be designed to enable target range and speed information to be set in manually by the gunner or automatically by the radar (see 6.1).
MIL-C-70701 - Cable Assembly W8, Fire Control Processor: 9397464
This specification covers the requirements, examinations and tests for cable assembly W8, fire control processor (cable assembly), hereinafter called "cable assembly," used on Gun, Anti-Aircraft Artillery, Self-Propelled, 20MM, M163A2, and Towed Vehicle, 20MM, M167A2. The cable assembly (located within the fire control processor) provides connections to the fire control processor (FCP) circuit boards. The cable assembly contains a 3.45 inch by 2.86 inch double-layered relay module board with one microcircuit and four limit relays (see 6.1).
MIL-C-71086 - Component Assembly, A2, Power Supply And Driver: 12000021
This specification covers the requirements, examinations and tests for Power Supply & Driver Component Assembly, A2, part of the Servo Amplifier used on Gun, Air Defense Artillery, Towed 20-MM, M167A1/A2.
MIL-D-45624 - Demodulator, Pulse, 7621688
MIL-D-48435 - Distribution Box: 10548533
This specification covers the distribution box, a part of Radar Set AN/VPS-2.
MIL-D-50656 - Diode Board Assembly: 10549017
This specification covers a diode board assembly used in the Power Supply PP-4812/VPS-2, part of the Radar Set AN/VPS-2 and the MX8051/TPM-22 and PP-6323/TPM-22, part of the Radar Test Set AN/TPM-22.
MIL-D-50669 - Driver, Switch: 10548602
This specification covers the switch driver (hereinafter identified as diode switch driver) used in Receiver-Transmitter TR-860/VPS-2, part of Radar Set AN/VPS-2 (see 6.1).
MIL-D-50677 - Detector, Doppler: 10548509
This specification covers a doppler detector assembly used in Radar Receiver R-1475, part of Radar Set AN/VPS-2.
MIL-D-60222 - Delay Cell, 7694430
MIL-D-60510 - Delay Cell: 7615435
This specification covers one type ultrasonic delay line operated at 60 megahertz (MHz). It is used to generate a series of pulses for range calibration.
MIL-D-70566 - Distribution Box Assembly: 9361136
This specification covers the requirements, examinations and tests for the distribution box assembly, hereinafter referred to as the D-box, used in Gun, Anti-Aircraft, Artillery, Self-Propelled 20MM, M163A2, and Towed 20MM, M167A2 (see 6.1).
MIL-D-70687 - Driver Circuit Board: 12594675
This specification covers the pre-amplifier assembly 12594675 herein referred to as the Driver Circuit Board, a sub-assembly of the Serve Electronics 10548193.
MIL-D-70704 - Distribution Box: 9397370
This specification covers the requirements and tests for the distribution box, a part of Radar Set AN/VPS-2A (see 6.1).
MIL-D-81277 - Demodulator, Ld 547012, (For Torpedo Mk 46 Mod O)
MIL-G-45611 - Generator, Sweep, O-294A/M
MIL-G-45615 - Generator, Sweep Tracking, 7620502
MIL-G-45668 - Generator, Pulse, O-295/M
MIL-G-50322 - Generator, Digital: 10548613
This specification covers a digital generator, here in after called a 7.5 - MHz clock generator, used in Range Computer CP888/VPS-2, part of Radar Set AN/VPS-2 and in Subassembly MX-8048/TPM-22, part of Radar Test Set AN/TPM-22.
MIL-G-50671 - Gate Transmit, Board B. 10549207
This specification covers the transmit gate, board B, used in assembly 2A5 of Receiver- Transmitter, Radar RT-860/VPS-2, part of Radar Set AN/VPS-2.
MIL-G-50672 - Gate, Transmit Board, 10549205
MIL-G-50676 - Gate I MIL-G-45615 - Generator, Sweep Tracking, 7620502
MIL-G-45668 - Generator, Pulse, O-295/M
MIL-G-50322 - Generator, Digital: 10548613
This specification covers a digital generator, here in after called a 7.5 - MHz clock generator, used in Range Computer CP888/VPS-2, part of Radar Set AN/VPS-2 and in Subassembly MX-8048/TPM-22, part of Radar Test Set AN/TPM-22.
MIL-G-50671 - Gate Transmit, Board B. 10549207
This specification covers the transmit gate, board B, used in assembly 2A5 of Receiver- Transmitter, Radar RT-860/VPS-2, part of Radar Set AN/VPS-2.
MIL-G-50672 - Gate, Transmit Board, 10549205
MIL-G-50676 - Gate I-F: 10548649
MIL-G-50678 - Gate, Multiple, Circuits: 9342754
MIL-G-50680 - Gate Circuit, Multiple Board Assembly - Upper: 9342753
MIL-G-50681 - Gate Circuit, Multiple, Board Assembly - Lower: 10548550
MIL-G-50683 - Gate, I-F Board Assembly -- Upper: 10548656
MIL-G-50684 - Gate, I-F Board Assembly - Lower: 10548654
This specification covers an i-f gate board assembly - lower (10548654) part of the 1-f gate assembly (10548649) , used in Radar Receiver R1475, part of Radar Set AN/VPS-2 (see 6.1).
MIL-G-60662 - Generator, Sight Current 12000239
This specification covers the requirements, quality assurance provisions and packaging for the Generator Sight Current 12000239, herein after referred to as the generator. The generator is part of Vulcan Weapon Systems M163A1 and M167A1 (see 6.1).
MIL-G-70595 - Gyro Control Board: 9361069
MIL-G-81168/4 - Gyroscope, Rate Integrating
MIL-G-81168/5 - Gyroscope, Rate Integrating
MIL-H-70689 - Heatsink Assembly: 12594650
This specification covers the pre-amplifier assembly 12594650 herein referred to as the Heatsink Assembly, a sub-assembly of the Servo Electronics 10548193.
MIL-I-46331 - Indicator, Azimuth Range, Ip-289/M
This specification covers one type of precision indicator for indicating azimuth and range and will hereinafter be referred to as "indicator". The indicator is used with antiaircraft and guided missile fire control systems listed in 6.1.
MIL-M-45138 - Modulator, Radar Md-243/M
MIL-M-45616 - Monitor-Control 7604212
MIL-M-45625 - Mixer Stage, Sweep Control, Cv-318/M
MIL-M-45626 - Modulator, Range, 7603587
MIL-M-45670 - Modulator, Data: Md-242-/Ms
This specification covers one type of data modulator, hereinafter referred to as "modulator".
MIL-M-48428 - Microwave Chassis Assembly: 10549047
This specification covers the Microwave Chassis Assembly, 10549047, hereinafter referred to as microwave chassis, which is a sub-assembly of thge Receiver-Transmitter, RT-860/VPS-2, a part of Radar Set AN/VPS-2.
MIL-M-48432 - Mixer Preamplifier: 10548160
This specification covers the requirements and tests for the Mixer Preamplifier Assembly, 10548160, herein referred to as the mixer preamp, a subassembly of the Microwave Chassis Assembly, 11731190, part of Receiver-Transmitter RT-860/VPS-2, part of Radar Set AN/VPS-2 and part of Radar Test Set AN/TPM-22.
MIL-M-70705 - Microwave Chassis Assembly: 9361371
This specification covers the Microwave Chassis Assembly, 9361371, herein referred to as microwave chassis, which is a subassembly of the Receiver-Transmitter, RT-860A, a part of Radar Set AN/VPS-2A (see 6.1).
MIL-N-50654 - Network, Pulse Forming: 11740288
This specification covers the pulse forming network (PFN) board assembly. This network provides the charge and discharge path which is used to form the modulator output pulse. The board assembly is an integral assembly in the klystron power supply, a part of the AN/VPS-2 Radar Set.
MIL-O-48434 - Oscillator, Doppler, Component Board Assembly, 10559694
MIL-O-50665 - Oscillator Doppler: 10548833
This specification covers the doppler oscillator assembly used in Radar Receiver R-1475, a part of Radar Set AN/VPS-2.
MIL-O-70688 - Output Circuit Board: 12594680
MIL-P-45124 - Power Supply Pp-1159/Ms
MIL-P-45142 - Power Supply Pp-1178/M
MIL-P-45621 - Panel, Relay, Plotting Data Selection
MIL-P-45622 - Power Supply Pp-2087/Tpg-4
MIL-P-50317 - Protector, Overvoltage: 10548031 (+5 Volt Filter)
MIL-P-50321 - Power Supply: 9342815 (Klystron)
MIL-P-50323 - Power Supply: 11834450 (Klystron Beam)
This specification covers a klystron beam power supply used in Test Set Subassembly MX-8047/TPM-22A, part of Radar Test Set AN/TPM-22A, and in Receiver-Transmitter RT-860/VPS-2, part of Radar Set AN/VPS-2.
MIL-P-50324 - Pulse Shaper: 10548801
This specification covers the requirements, examinations and tests for a pulse shaper used in Radar Receiver-Transmitter RT-680/VPS-2, part of Radar Set AN/VPS-2 and in subassembly Test Set MX-8048/TPM-22, part of Radar Test Set AN/TPM-22.
MIL-P-50686 - Power Supply, Pp-4812/Vps-2:10548440
MIL-P-60158 - Power Supply, Pp-1162/Ms
MIL-P-70565 - Processor, Fire Control: 9360890
This specification covers the requirements, examinations and tests for the Fire Control Processor (FCP) used in Gun, Anti-Aircraft, Artillery, Self-Propelled 20MM, M163A2, and Towed 20MM, M167A2.
MIL-P-70596 - Power Board: 9361073
This specification covers the general and detail requirements for the Power Board used in the M61A1 Director Sight which provides the signals to control the optical line of sight.
MIL-P-70686 - Pre-Amp Circuit Board: 12594670
This specification covers the pre-amplifier assembly 12594670 herein referred to as the Pre-Amp Circuit Board, a sub-assembly of the Servo Electronics 10548193.
MIL-R-18669 - Radar Sets An/Spw-2 And An/Spg-49
MIL-R-18984 - Radar Bombing Equipment An/Apa-16, Bench, Preflight, And Flight Test, Instructions For
This specification establishes bench, preflight, and flight test instructions for Model AN/APA-16 Radar Bombing Equipment, a device for performing low altitude bombing and when used with TD-6/APA-16 Adapter Unit, for performing rocket firing.
MIL-R-45600 - Regulator, Voltage Cn-290/M
This specification covers one type of voltage regulator which is used in the fire control and guided missile systems listed in 6.1.1.1.
MIL-R-45623 - Receiver-Transmitter, Radar, Rt-325/Ms
MIL-R-45630 - Regulator, Voltage Plus 250V, 7620587
MIL-R-45667 - Regulator, Voltage, Cn-281/M
MIL-R-48427 - Reflector And Feed Assembly: 10556313
MIL-R-50318 - Regulator, Voltage: 10548034 And 11727766
MIL-R-50319 - Regulator, Voltage: 10548043 And 11727763
MIL-R-50325 - Regulator, Voltage. 10548986
MIL-R-50326 - Regulator, Voltage. 10548987
MIL-R-50327 - Regulator, Voltage: 10548988
MIL-R-50328 - Regulator, Voltage. 10549008
MIL-R-50651 - Radar Set An/Vps-2: 10549058 (Range Only Radar)
This specification covers Radar Set AN/VPS-2, hereafter referred to as the radar. The radar is used in the fire control system (FCS) for the 20-millimeter Antiaircraft (20-Jmn AA) Artillery Gun, M163A1 (self-prppelled) and M167A1 (towed), associated with the forward Area Air Defense System (FAADS) (see 6.1).
MIL-R-50657 - Regulator, 15-Volt, Board Assembly: 10548959
This specification covers a 15-volt regulator board assembly, hereinafter referred to as a 15-volt regulator, used in the regulator assemblies of Power Supply PP-4812/VPS-2, part of Radar Set AN/VPS-2 and in Subassembly PP-6324/TPM-22, part of Radar Test Set AN/TPM-22 (see 6.1).
MIL-R-50658 - Regulator, 15 Volt, Board Assembly: 10548958
MIL-R-50659 - Regulator, 23-Volt, Board Assembly: 10549014
MIL-R-50660 - Regulator, 23 Volt, Board Assembly: 10548960
This specification covers a 23-volt regulator board assembly, hereinafter referred to as a 23-volt regulator, used in the regulator assemblies of the Power Supply PP-4812, part of Radar Set AN/VPS-2 and in the Subassembly PP-6324, part of Radar Test Set AN/TPM-22 (see 6.1).
MIL-R-50661 - Regulator, 33 Volt, Board Assembly: 10549016
This specification covers a 33-volt regulator board assembly, hereinafter referred to as a 33-volt regulator, used in the regulator assemblies of Power Supply PP-4812, part of Radar Set AN/VPS-2 and in Subassembly PP-6324, part of Radar Test Set AN/TPM-22.
MIL-R-50662 - Regulator, 33 Volt, Board Assembly: 10549015
MIL-R-50663 - Regulator, 6 Volt, Board Assembly: 10548953
MIL-R-50664 - Regulator, 29 Volt, Board Assembly: 10548961
MIL-R-50668 - Receiver-Transmitter, Radar Rt-860/Vps-2: 10548089
This specification covers Receiver-Transmitter, Radar, RT-860/VPS-2, hereinafter referred to as a receiver-transmitter, which is part of Radar Set AN/VPS-2 (see 6.1).
MIL-R-50674 - Receiver, Radar R-1475/Vps-2: 10548338
MIL-R-70561 - Receiver-Transmitter, Radar Set Rt-860A/Vps-2A: 9361152
MIL-S-45632 - Switch Zero Set 7622736
MIL-S-48426 - Servo Electronics, 10548193
MIL-S-48431 - Solid State X-Band Source: 10548182
MIL-S-50666 - Servo Drive, Traverse: 10548052
MIL-S-50667 - Servo Drive, Elevation: 10548062
MIL-S-50673 - Shaper Pulse: 10548806
MIL-S-50795 - Servo Assembly, 10545441
This specification covers the general requirements for servo assembly, hereinafter referred to as "assembly", which form a part of the Sight Current Generator.
MIL-S-60661 - Sight, Lead Computing, M61, 11747062
MIL-S-70587 - Servo Amplifier: 9361156
This specification covers the servo amplifier used on Gun, Anti-Aircraft, Artillery, Self-Propelled 20MM, M163A2, and Towed 20mm, M167A2.
MIL-T-10222 - Tracker, Radar, T9
MIL-T-45127 - Timer, Internal Td-117/M
MIL-T-45137 - Timer, Interval, Td-115/M
MIL-T-45139 - Timer, Interval Td-224/M
MIL-T-45603 - Timer, Interval Td-114/M
MIL-T-46361 - Timer, Interval, 9154656
MIL-T-48588 - Test Set, Inverter, Converter Panel Assembly: 11747097
MIL-T-50320 - Transmit Gate: 10549202
MIL-T-60860 - Test Set, Antenna An/Vpm-1
MIL-T-60887 - Test Set, Organizational Maintenance An/Tpm-23
This specification covers Organizational Maintenance Test Set AN/TPM-23 (hereinafter referenced as OMTS) a portable test set used for second echelon (organizational) maintenance of Radar Set AN/VPS-2.
MIL-V-70579 - Voltage Converter: 9360839
This specification covers the voltage converter used on Gun, Anti-Aircraft Artillery, Self-Propelled, 20 MM, M163A2 and Towed 20 MM, M167A2.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business